Please correctly select your region and language. Products, services or delivery options can be specific by region and may be different in other regions.
Jomy is a network of independent companies. Each Jomy company is a legally distinct and separate entity. For more information on each local Jomy company, please refer to the company section on the relevant web domain.
You are currently visiting a site for Jomy S.A., a Belgian company with main address at 20 Rue Bourgogne, 4452 Juprelle, Belgium.
Only materials that not subject to corrosion can be used.
The ladders are made of aluminum alloy profiles, anodized 10 micron, natural mat finishing, and fasteners (bolts, rivets and washers) of stainless steel A2-70 DaN/mm2. Joint washers, bushes, plugs, and other materials in polyamide and elastomer are also used.
No protective treatment, painting, or maintenance is required, except when exposed to aggressive environments. No welding is allowed.
Rungs are clinched into the uprights. Bolts and rivets are used for all other assembly.
Ladders are offered in polyester powder coating in any RAL color.
Counterbalanced ladders are installed vertically.
Fixing clamps of a single type are used to attach wall fasteners and safety cage hoops to the ladder uprights. They can be clipped to the ladder uprights at any desired position.
Ladders expand freely within anchor brackets, without deformation or damage, to allow for thermal expansion of ladders and wall structures.
For lateral access, the upper rung is at approximately 1.5m above the upper point of access. For access from the top, widened upright projections can be used, allowing a passageway of at least 62cm. In this case, the upper rung is at level with the access floor.
JOMY counterbalanced ladders correspond to standards EN 131 and ISO 14122-4.
Ladders are composed of standardized elements of 3.36m maximal length, assembled to the desired length. These elements are connected by perforated aluminum sleeves that are shifted inside the uprights. Bolts are used for fastening.
The uprights are spaced at 400mm. The rung axes are spaced at 280mm.
Ladder uprights have oblong sections of 75mm x 25mm x 2mm with rounded corners.
The rungs are round at 37mm with a flattened and grooved anti-slip upper face.
Counterbalanced Lower Sliding Ladder
A counterbalanced lower sliding ladder can be provided to prevent access by unauthorized persons.
The distance between the floor and the foot of the sliding ladder (clearance height) is at a maximum of 3m
The sliding part is counterbalanced by weights that shift in hollow profiles.
Axes, springs, and cables are made of stainless steel.
Pulley wheels are made of polyacetal (POM-H);
Sliding part is released by a mechanism controlled from above, from below, or from the side.
Cookies! Ce site utilise des cookies pour faciliter votre expérience de navigation et peut fonctionner moins bien si vous les désactivez. En naviguant sur notre site avec les cookies, vous acceptez leur utilisation.